Sharp 1340VS
Main Features:
  • Variable Speed Spindle Drive with Digital Display
  • Hi-Low Gear Shift for Spindle Speed, Range from 40-2000 RPM
  • Directional Control of Carriage Feed in Front of Apron for Easy Operation
  • Hardened and Ground Gears in Headstock
  • Induction Hardened and Ground Bedways for Rigid Structure
  • Jog Button
  • Spindle Supported by 2 High Precision Tapered Roller Bearings
  • Electrically Activated Foot Brake for Quick Stopping Action
  • Built in Cabinet for Tool Storage
  • Carriage Equipped with Overload Clutch to Protect Gears and Screws
  • Available in 3 Phase or Single Phase
Main Specifications:
  • Swing Over Bed...........................................................13"
  • Swing Over Cross Slide..............................................8 5/16"
  • Swing Over Gap...........................................................18 1/2"
  • Width of Bed.................................................................7 1/2"
  • Distance Between Centers.........................................40"
  • Spindle Nose Type.......................................................D1-4 Camlock
  • Spindle Bore.................................................................1 9/16"
  • Spindle Speeds............................................................40 - 2,000 RPM
  • Taper of Spindle Bore.................................................MT #5
  • Longitudinal Feeds......................................................0.0016 - 0.046 IPR (40 kinds)
  • Cross Feeds.................................................................0.0005 - 0.015 IPR (40 Kinds)
  • Inch Threads.................................................................2 - 56 TPI (39 Kinds)
  • Metric Threads.............................................................0.5 - 12mm (42 Kinds)
  • Leadscrew Diameter, Pitch.........................................1", 8TPI
  • Cross Slide Travel.......................................................6 3/4"
  • Compound Travel........................................................3 1/2"
  • Apron Width.................................................................11"
  • Cross Slide Width........................................................4.5"
  • Bed Lenght...................................................................64"
  • Bed Width.....................................................................7 1/2"
  • Quill Travel...................................................................4"
  • Quill Diameter..............................................................1 9/16"
  • Quill Taper...................................................................MT #3
  • Motor............................................................................3 HP
  • Net Weight...................................................................1,580 lbs
Standard Equipment:
  • Coolant System
  • 6" Diameter Back Plate
  • 4-Way Tool Post
  • Splash Guard
  • Thread Dial
  • Center Sleeve (MT #5 x #3)
  • Dead Centers (MT #3)
  • Foot Brake
  • Tool Kit
Optional Equipment:
  • 8" 3 Jaw Chuck
  • 8" 4 Jaw Chuck
  • 12" Face Plate
  • Follow Rest
  • Single Tool Post
  • Micrometer Carriage Stop
  • Taper Attachment
  • Live Center (MT #3)
  • Drill Chuck
  • Digital Readout System