 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Precision Matthews Chenlong Band Saw
PM Chenlong CS280 Band Saw
| Quality Machine Tools sales@machinetoolonline.com :Email 412-787-2876 :or call for your immediate needs! |
PM CS280
Price: $5999.00
Freight: FREE
Total: Price: $5999.00
Price: $5999.00
Freight: FREE
Total: Price: $5999.00
You are looking at a brand new Precision Matthews / Chenlong extra heavy duty
band saw, model CS-280.
THIS SAW CARRIES A 2 YEAR WARRANTY ON ALL PARTS, EXCEPT
CONSUMABLE ITEMS. SO YOU CAN BUY WITH CONFIDENCE!
We support all parts for these saws too and have been dealing with them for quite
a long time, so you will never be stuck. This is the #1 reason to buy from us, we
support what we sell.
This is a very heavy duty, Semi Automatic band saw capable of heavy duty
production use, in machine shops and industrial settings. This is not like the
smaller saws out there that look like they have a similar capacity, this one is a fully
hydraulic, heavy duty machine. Check out the video of an almost identical PM
model cutting, it cuts through a piece of 3-1/2" Round Hot Rolled 1144 Steel in
about 40 seconds. And it only cut a 1/32" piece off it, they cut straight and precise
eliminating material waste. Click this link below to see the video.
http://www.youtube.com/watch?v=N4I2n_X7trc
Look at the blade when comparing to smaller saws, This saw uses 1", 1-1/16" or
1-1/8" Blades, this is a very heavy duty saw, NOT a light duty saw!
This saw has a Hydraulic Vise, Hydraulic Lift, Semi Automatic Operation, and
comes with a work support, work stop, and blade. The only thing you will need to
get this up and running is Coolant, Oil, and Electric!
Again, this is an industrial saw built for heavy duty use, and precise, fast cuts.
Please do not compare this saw to machines half the weight or size of this one,
there is no comparison. The manufacture who makes these also makes saws for
the largest band saw names in the world, and a saw like this normally sells for well
over $12,000.
This saw weighs about 2300 pounds, this is a serios industrial machine ready for
every day use.
If you need a saw for heavy duty use, this would be the machine for you. Here are
some of the specs on the machine:
Max Round Cutting Capacity 11", Max Rectangle Capacity 16" Wide x 11" Tall
Blade Speeds 5 steps, 89, 131, 177, 223, 262 Feet per Minute, Feed Speeds
Hydraulic, Stepless Feed Rate adjusted with 2 knobs on control panel for speed as
well as cutting pressure, Main Motor 3hp, Power 220 Volt, 3 phase 15 Amps.
If you have any questions or would like to see this saw in person, please give us a
call at 412-787-2876 or if you would like to stop by, we are at Quality Machine
Tools, 701 Parkway View Dr., Pittsburgh, PA 15205
For payment, we take all credit cards including Visa, AMEX, Discover, Mastercard,
and Paypal
THIS SAW IS IN STOCK HERE IN PITTSBURGH, PA AND IS AVAILABLE FOR A
FAST DELIVERY TIME, IT WOULD BE ABOUT 1 TO 7 DAYS DEPENDING HOW
FAR FROM US YOU ARE LOCATED, WE HAVE FAST SHIPPING! IF YOU NEED IT
FAST, WE WILL GET IT THERE!
band saw, model CS-280.
THIS SAW CARRIES A 2 YEAR WARRANTY ON ALL PARTS, EXCEPT
CONSUMABLE ITEMS. SO YOU CAN BUY WITH CONFIDENCE!
We support all parts for these saws too and have been dealing with them for quite
a long time, so you will never be stuck. This is the #1 reason to buy from us, we
support what we sell.
This is a very heavy duty, Semi Automatic band saw capable of heavy duty
production use, in machine shops and industrial settings. This is not like the
smaller saws out there that look like they have a similar capacity, this one is a fully
hydraulic, heavy duty machine. Check out the video of an almost identical PM
model cutting, it cuts through a piece of 3-1/2" Round Hot Rolled 1144 Steel in
about 40 seconds. And it only cut a 1/32" piece off it, they cut straight and precise
eliminating material waste. Click this link below to see the video.
http://www.youtube.com/watch?v=N4I2n_X7trc
Look at the blade when comparing to smaller saws, This saw uses 1", 1-1/16" or
1-1/8" Blades, this is a very heavy duty saw, NOT a light duty saw!
This saw has a Hydraulic Vise, Hydraulic Lift, Semi Automatic Operation, and
comes with a work support, work stop, and blade. The only thing you will need to
get this up and running is Coolant, Oil, and Electric!
Again, this is an industrial saw built for heavy duty use, and precise, fast cuts.
Please do not compare this saw to machines half the weight or size of this one,
there is no comparison. The manufacture who makes these also makes saws for
the largest band saw names in the world, and a saw like this normally sells for well
over $12,000.
This saw weighs about 2300 pounds, this is a serios industrial machine ready for
every day use.
If you need a saw for heavy duty use, this would be the machine for you. Here are
some of the specs on the machine:
Max Round Cutting Capacity 11", Max Rectangle Capacity 16" Wide x 11" Tall
Blade Speeds 5 steps, 89, 131, 177, 223, 262 Feet per Minute, Feed Speeds
Hydraulic, Stepless Feed Rate adjusted with 2 knobs on control panel for speed as
well as cutting pressure, Main Motor 3hp, Power 220 Volt, 3 phase 15 Amps.
If you have any questions or would like to see this saw in person, please give us a
call at 412-787-2876 or if you would like to stop by, we are at Quality Machine
Tools, 701 Parkway View Dr., Pittsburgh, PA 15205
For payment, we take all credit cards including Visa, AMEX, Discover, Mastercard,
and Paypal
THIS SAW IS IN STOCK HERE IN PITTSBURGH, PA AND IS AVAILABLE FOR A
FAST DELIVERY TIME, IT WOULD BE ABOUT 1 TO 7 DAYS DEPENDING HOW
FAR FROM US YOU ARE LOCATED, WE HAVE FAST SHIPPING! IF YOU NEED IT
FAST, WE WILL GET IT THERE!