Main Features:
  • Super Strong Column and Base with Honeycomb Ribbed Castings
  • High Precision Lead screws
  • Satin Chrome Finished Dials
  • Built in Coolant System In Base
  • Double Knee and Table Locks
  • Ram Equipped w/ Double Locks
  • Large Diameter Quill is Hard Chromed
  • One-Piece Quill Pinion and Shaft
  • Spindle Head is Internally Cooled
  • Induction Hardened and Ground Ways and Table
  • Heavy Duty Motor
  • High Precision Class 7 Spindle Bearings
  • Three Stage Power Down Feed w/Auto Stop
  • Two Year Warranty On All Parts Including Electrical
Main Specifications:
Table Size                                         9x49               10” x 54”
Table Load Capacity                        700lbs                900 lbs
Table T-Slot Size                              5/8”x 3               5/8”x 3
Longitudinal Travel Hand Only         35 ½”                38”
Longitudinal Travel w/ Power Feed 33"                    34 1/4”
Cross Travel                                      13"                    18”
Vertical Z Travel                                14"                    17”
Ram Travel                                         12"                    18”
Quill Feed Speeds                         0.0015”, 0.003”, 0.006”/REV
Quill Travel                                         5"                       5”
Spindle Taper                                    R8                      R8
Quill Diameter                                    3 3/8”                 3 3/8”
Head Swivel RH/LH                            90º / 90º             90º / 90º
Head Tilting F/B                                 45º / 45º             45º / 45º
Ram Turret Swivel                             360º                    360º
Spindle Motor                                           3HP 3 Phase
Spindle Speeds Type                                Vari-Speed
Spindle Speeds (RPM)                           60-4300 (Vari)
Net Weight                                         2600lbs              3600 lbs
Dimensions                                        86” x 69” x 67”    89” x 81” x 72

Standard Equipment:      
  • Way Covers      
  • Draw Bar
  • Meehanite Castings
  • Honeycomb Ribbed Casting
  • Turcite B Way Coating
  • One Shot Lube System
  • 52pc Clamp Set      
  • R-8 Collet Set
  • 6" Vise w/swivel base        
  • Work Light
  • Coolant System        
  • Siemens Electronics
Email sales@machinetoolonline.com or call 412-787-2876 for your immediate needs!
Has an Easy to Use                          Comes with MANY                Heavy Duty Box Ways                  Meehanite Casting
Control Panel                             Accessories Standard!
Siemens Electronics           Throughout
with magnetic contactors, Not just a
drum switch for on and off
Optional Equipment:
  • Single phase Motor..............$395.00
  • Inverter Variable Speed......$1495.00
  • X and Y Ball Screws.............$995.00
  • 6" vise w/swivel base..........$165.00 *   
  • 52pc. Clamp set....................$59.00 *
  • R-8 collet set.........................$55.00 *
  • Newall C-80 DRO 2 axis        
Installed............................... $1199.00
  • Newall C-80 DRO 3 axis        
Installed................................$1499.00
  • PM DRO (Easson) 3 axis
(3 year warranty), Installed..$995.00
  • PM DRO (Easson) 2 axis
(3 year warranty),Installed...$795.00
  • X axis power feed               
    Installed.................................$395.00
  • Y axis power feed                 
Installed.................................$425.00
  • Knee power feed                  
Installed.................................$450.00
  • Riser Block 8"....................... $900.00
*indicates included standard with machine
Variable Speed Head
Dual Table Locks
      PM-949V  $6595.00  with Free Shipping!
  PM-1054V $7495.00 with Free Shipping!
            
Quality Machine Tools
sales@machinetoolonline.com
412-787-2876
PM 949V and 1054V Milling Machines
Precision Matthews
Free Shipping
(excludes Hawaii, Alaska
& some parts of Canada and does
not include Liftgate or Residential
Fees that may apply)
Already Own This Machine?
Below are some links to help you with setting up and
using your new lathe or milling machine.
PM-949V                                  PM1054V
PM-949S Model
412-787-2876
click here for more info:
Step Pulley Mills
New Models now
available for order     

PM-949VF  $7995.00
PM-1054VF  $8995.00

Call now for more
information!