Precision Matthews Chenlong Band Saw
PM Chenlong G4035 Band Saw
This is a very heavy duty, Semi Automatic band saw capable of
heavy duty production use, in machine shops and industrial
settings. This is not like the smaller saws out there, this one is a
fully hydraulic, heavy duty machine. Check out the video of it
cutting, it cuts through a piece of 3-1/2" Round Hot Rolled Steel
in about 40 seconds. And it only cut 1/32" piece off it, it cuts
straight and precise eliminating material waste. Click this link
below to see the video.
http://www.youtube.com/watch?v=N4I2n_X7trc
Look at the blade when comparing to smaller saws, This saw
uses 1-1/4" or 1-1/2" Blades, this is a very heavy duty saw,
NOT a light duty saw!
Again, this is an industrial saw built for heavy duty use, and
precise, fast cuts. Please do not compare this saw to machines
half the weight or size of this one, there is no comparison. The
manufacture who makes these also makes saws for the largest
band saw names in the world, and a saw like this normally sells
for well over $12,000.
If you need a saw for heavy duty use, this would be the
machine for you. Here are some of the specs on the machine:
Max Round Cutting Capacity 14", Max Rectangle Capacity 14"
Wide x 9" Tall
Blade Speeds 3 steps, 115, 165, 260 Feet per Minute, Feed
Speeds Hydraulic, Stepless Feed Rate adjusted with knob on
control panel, Main Motor 3hp, Power 220 Volt, 3 phase 15
Amps.
This saw also comes with 4 FREE USA Made Blades! Your
Choice of Tooth Pitch, or a Variety of Pitches!
heavy duty production use, in machine shops and industrial
settings. This is not like the smaller saws out there, this one is a
fully hydraulic, heavy duty machine. Check out the video of it
cutting, it cuts through a piece of 3-1/2" Round Hot Rolled Steel
in about 40 seconds. And it only cut 1/32" piece off it, it cuts
straight and precise eliminating material waste. Click this link
below to see the video.
http://www.youtube.com/watch?v=N4I2n_X7trc
Look at the blade when comparing to smaller saws, This saw
uses 1-1/4" or 1-1/2" Blades, this is a very heavy duty saw,
NOT a light duty saw!
Again, this is an industrial saw built for heavy duty use, and
precise, fast cuts. Please do not compare this saw to machines
half the weight or size of this one, there is no comparison. The
manufacture who makes these also makes saws for the largest
band saw names in the world, and a saw like this normally sells
for well over $12,000.
If you need a saw for heavy duty use, this would be the
machine for you. Here are some of the specs on the machine:
Max Round Cutting Capacity 14", Max Rectangle Capacity 14"
Wide x 9" Tall
Blade Speeds 3 steps, 115, 165, 260 Feet per Minute, Feed
Speeds Hydraulic, Stepless Feed Rate adjusted with knob on
control panel, Main Motor 3hp, Power 220 Volt, 3 phase 15
Amps.
This saw also comes with 4 FREE USA Made Blades! Your
Choice of Tooth Pitch, or a Variety of Pitches!
| Quality Machine Tools sales@machinetoolonline.com :Email 412-787-2876 :or call for your immediate needs! |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
PM G4035
Price: $5999.00
Freight: FREE
Total: Price: $5999.00
Price: $5999.00
Freight: FREE
Total: Price: $5999.00
