PM 1640 CNC Lathe
with Fanuc Control
Price:
29,995.00
Main Features:
  • Fanuc 0I Mate CNC Controls
  • Spindle Speeds from 20 to 2500 RPM
  • Tailstock Included as Standard Equipment     
  • Heavy Duty 12" Wide Bed
  • Turcite B Coated Ways
  • Complete Enclosure Splash / Chip Guard System
  • Easy to Use Power Fanuc Control with Canned Cycles for Fast Programming
  • 2" + Spindle Bore
  • Spindle is Balanced, Hardened and Precision Ground
  • Spindle is Supported by High Precision Tapered Roller Bearings
  • All Gears and Shafts are Hardened and Precision Ground
  • Automatic Lubrication System in Headstock, Ballscrews and Guideways
  • Pneumatic Chuck, Hydraulic Chuck and Tailstock are Available
  • 2 Year Warranty on all Parts and CNC Controls
Main Specifications:
Max. Swing over Bed
Max. Length of Work Piece
Max. Swing Over Cross Slide
Spindle Bore
Spindle Speeds
Diameter of Tailstock Quill
Max. Travel of Tailstock Quill (Manual)
Taper of Tailstock Quill Center
4 Way Automatic Tool Post Change Time
6 Position Turret Tool Change Time
Max. Travel for X axis
Max Travel for Z Axis
X Max. Rapid Feed Rate
Z Max. Rapid Feed Rate
Main Motor
Coolant Pump
Auto Lubrication
Net Weight, Approx.
15.75”
40”
7.87”
2.04”
20-2,500 rpm
3”
6”
M.T. #5
2.4 Seconds
2 Seconds
8.86”
34.25”
197 IPM
157 IPM
7.5 HP, 220V/440V - pre-wired on 220V 3 Phase
1/8 HP, 220V, 1 Phase
1/16 HP, 220V, 1 Phase
3,748 LBS
Standard Accessories:
  • 8” 3-Jaw Chuck   
  • Enclosure Light and Coolant System
  • Full Enclosure       
  • Lube Pumps for All Guideways and Ballscrews
  • (2) Dead Centers
  • (1) Reducing Sleeve
  • Leveling Pads and Leveling Screws     
  • Movable Control Panel for Easy Use
  • Easy to Use Fanuc Control
  • Manuals and Programming Books        
  • 2 Year Warranty on All Parts
Optional Equipment:
  • 6 Position Programmable Automatic Indexing Turret             $1495.00
  • Hydraulic Chuck                                                                          $3295.00
  • Hydraulic Tailstock                                                                      $2750.00
  • Pneumatic Chuck                                                                        $2950.00
  • Door Interlock Switch                                                                 $550.00
Precision Matthews
Currently selling on Ebay with no
reserve!!!!  Check it out at:

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi
ewItem&ssPageName=STRK:MESELX:I
T&item=330345292335

Auction ends 7/27/09