Precision Matthews                PM-1330CNC
6 position turret
Easy to Use Controls
CNC Lathe with Siemens 802C Control $14995.00 (normally in stock)
(Servo Motors with Encoder Feedback, Spindle Encoder, 6 position automatic tool turret)

CNC Lathe with Siemens 802S Control $12995.00 (special order only)
(Stepper Motors, Spindle Encoder, 4 position Automatic Toolpost)

FREE SHIPPING ON EITHER MACHINE!
And YES these are real CNC Lathes suitable for production. You can hold
.0005 or better (depends on the operator) and at this price, you can't go
wrong!
It has canned cycles for threading, boring, drilling, turning, and so much
more. Don't let the price fool you, this is a well built, full featured CNC Lathe.
Main Features:
  • ISO 9001 Certified
  • Easy to Use SIEMENS 802C CNC Control with Servo Motors on X and Y Axis, and Encoder Feedback on all
    Axis and Spindle for More Production and Long Part Runs.
  • CNC Programmable Spindle Speeds from 80 to 2000 rpm.
  • Safety Chip Guard Front Door
  • Programmable Automatic 6 Position Turret
  • Full Ballscrew Enclosure to Protect from Chips and Dirt
  • RS 232 Interface
  • Easy to Learn Conversational Programming canned cycles for boring, turning, drilling, threading, and
    more
  • Canned Cycles for Easy Programming - such as: Profiling, Material Removal, Roughing and Finishing,
    Inside & Outside Threading, Line, Arc, Drilling and Floating Tapping, Cut-off, Grooving, Radius,
    Chamfering  etc.
  • G Code and M Code Programming
  • Constant Surface Speed
  • CAD/CAM  
  • 15 Tool Library
  • Tool Length & Radius Compensation
  • Spindle is Balanced, Hardened and Precision Ground
  • Spindle is Supported by High Precision Tapered Roller Bearings   
  • All Gears and Shafts are Hardened and Precision Ground
  • Guideways Induction Hardened and Precision Ground
  • Automatic Lubrication System for Ballscrews and Guideways
  • Constant Lubrication in Headstock and Carriage
  • One Year Warranty
Main Specifications:
  • Max. Swing over Bed                                      13”            
  • Max. Length of Workpiece                             30”              
  • Max. Practical Cutting Length                       23”                 
  • Max. Swing over Cross Slide                        5-1/2”
  • Max. Turning Diameter over Bed                  13”
  • Width of Bed                                                   8-1/2”  
  • Spindle Bore / Mount                                1-1/2” / D1-4 Camlock
  • Taper of Spindle Center                              M.T.# 5
  • Spindle Speeds, CNC Programmable    80– 2000 rpm     
  • Diameter of Tailstock Quill                           1-7/8”
  • Max. Travel of Tailstock Quill (manual)      4-3/4”
  • Taper of Tailstock Quill Center                 M.T. # 3       
  • Auto Turret Tool Post                             6 positions, more tools possible with offsets and
    gang tooling setup
  • Max. Tool Size for Auto Turret                  5/8” x 5/8”
  • Max. Travel for X Axis                                      7”
  • Max. Travel for Z Axis                                     23”       
  • Main Motor                                      4 HP,  220V , 3 phase Programmable Variable Speed
  • Coolant Pump                                1/8 HP , 220V, 3 phase
  • Auto Lubrication                           1/16 HP , 220V 3 phase       
  • Net Weight, approx.                                  1,950LBS   
  • Overall Dimensions, LxWxH                  78” x 46” x 82”
Standard Equipment:
  •      6” Manual 3-Jaw Chuck with Set Reversible Jaws
  •      Programmable Automatic 6 Position Turret for More Tool Capacity
  •      Coolant System    
  •      Automatic Lubrication System
  •      Work Light
  •      Sliding Safety Door
  •      Full Rear Chip Guard