Precision Matthews  
PM-1127-VF
Main Features:

  • Made in an ISO 9002 Certified Factory
  • High Quality Electronics Used Throughout Machine for long term reliability
  • POWER CROSS FEED, BOTH IN, OUT, and LEFT and RIGHT, and WILL CUT
    LEFT HAND THREADS TOO
  • Super Smooth and Quiet running machine
  • Large Spindle Bore 1-1/16"  (LB Model has a 1-1/2" Spindle Bore)
  • Heavy Duty Bed Width 7" (same width as most 12"x36" Machines)
  • Variable Speed 120 Volt Single Phase Main Motor, 1.5hp
  • Variable Spindle Speeds From 50-1800 rpm
  • Inch Threads and Metric Threading, Both Right and Left Hand Threading
  • Spindle is Dynamically Balanced, Hardened and Precision Ground
  • Spindle is Supported by High Precision, Class 5, Adjustable Tapered Roller
    Bearings
  • All Gears and Shafts are Hardened and Precision Ground
  • Guideways Induction Hardened and Precision Ground for long life
  • 2 Year Warranty for Parts
  • INCH LEADSCREW AND FEED SCREWS for even, easy measurements
  • Digital Speed Readout Tachometer on face of machine
Main Specifications:

  • Distance Between Centers                27"
  • Max. Swing over Bed                         11"
  • Max Swing is Gap                              No Gap
  • Width of Bed                                      7"
  • Spindle Mount                                   Direct Mount w/ 3 Studs
  • Spindle Bore                                      1-1/16" (LB  is 1-1/2")
  • Spindle Speeds, Infinitely Variable    50-1800 RPM
  • Leadscrew Pitch (Main)                     8 TPI
  • Longitudinal Feeds                           .0025-.012 IPR
  • Cross Feeds                                      .001-.0056 IPR
  • Inch Threads                                     8 to 56 TPI
 (8,9,10,11,12,13,14,16,18,20,22,24,26,28,32,36,40,44,48,52,56 TPI)
  • Metric Threads                                  3mm to .5mm Pitch
  • Travel of Cross Slide                         6"
  • Travel of Compound                          2-3/4"
  • Tailstock Quill Travel                         3-1/2"
  • Tailstock Taper                                 MT#2  (LB model MT#3)
  • Main Motor                                        1.5HP Variable
  • Machine Weight                                 650 Pounds
  • Power Requirements                         120 Volt 1 phase
Optional Equipment:

  • 2 axis DRO, Installed $699.00
  • KB Electronics Speed Control Board $149.00 Installed
  • 6" 6 Jaw Chuck $389.00
  • 5C Collet Chuck $279.00
  • 33pc. Std. 5C Collet Set $139.99
  • 28pc. 5C Metric Collet Set $139.99
  • 6" 4 Jaw Chuck for 11127VF Lathe $109.00
  • 6" 4 jaw chuck for 1127VF-LB Lathe $109.00
  • 9 Piece Insert Type Cutting Tool Set $109.95  click for details
  • 8 pc 1/2" HSS Pre- Ground Cutting Tool Set $39.95 click for details
  • Spindle Mounted Spider for gun smithing (Made in USA) $199.95
    (Available Late January 2012)
Quality Machine Tools
sales@machinetoolonline.com :Email
412-787-2876 :or Call
for your immediate needs!
Already Own This Machine?
Below are some links to help you with setting up and
using your new lathe or milling machine.
Also available a Large Bore PM1127VF Lathe.  Comes standard with a
1-1/2" spindle bore and 6" Chuck Model# PM1127VF-LB Lathe.
Pricing and Options:
                                    PM-1127VF
                       Basic Package #1 $1699.00
  1. PM-1127VF Lathe with chip pan (No Stand)
  2. 5" 3 Jaw Chuck
  3. 4 way tool post
  4. Inch and Metric Threading Ability
  5. Thread Chasing Dial
  6. Headstock Dead Center
  7. Tailstock Dead Center
  8. Misc. Tools for operation (Wrenches, etc)
  9. Variable Spindle Speeds
  10. Power Cross Feed, In, Out, Left, and Right Feed
  11. Left Hand thread cutting with the flip of a lever
                   PM-1127VF
            Premium Package $2099.00
   Includes everything in Package #1 Plus:
  1. Quick Change Tool Post Set with 5 holders
  2. Live Center
  3. Tailstock Drill Chuck

                                 PM-1127VF-LB (Large Bore)
                        Package #1 $1899.00
  1. PM-1127VF-LB Lathe with chip pan (No Stand)
  2. 6" 3 Jaw Chuck
  3. 4 way tool post
  4. Inch and Metric Threading Ability
  5. Thread Chasing Dial
  6. Headstock Dead Center
  7. Tailstock Dead Center
  8. Misc. Tools for operation (Wrenches, etc)
  9. Variable Spindle Speeds
  10. Power Cross Feed, In, Out, Left, and Right Feed
  11. Left Hand thread cutting with the flip of a lever
  12. Large 1-1/2" Spindle Bore
                 PM-1127VF-LB
            Premium Package $2299.00
 Includes everything in Package #1 Plus:
  1. Quick Change Tool Post Set with 5 holders
  2. Live Center
  3. Tailstock Drill Chuck
Flat Rate of $199 Shipping
anywhere in the 48 US States
Lift Gate Delivery $45 if needed

$299 Shipping to most parts of
Canada

*We also ship to Alaska and Hawaii please
call for rates or ship with your carrier*
                                    PM-1127VF
       Popular Equipment Package $1899.00
  Includes everything in Package #1 Plus:
  1. 6" 4 Jaw Chuck
  2. 9" Face Plate
  3. Steady Rest
  4. Follow Rest
                                  PM-1127VF-LB (Large Bore)
     Popular Equipment Package $2099.00
Includes everything in Package #1 Plus:
  1. 6" 4 Jaw Chuck
  2. 9" Face Plate
  3. Steady Rest
  4. Follow Rest
Pictured with some optional
equipment
Optional Stand, same for both models $149.00 (No additional shipping costs if ordered with machine)
Optional Stand, same for both models $149.00 (No additional shipping costs if ordered with machine)
Model
 PM-1127VF
 PM-1127VF-LB
 OTHERS
Power Cross Feed, as well as power
carriage feed
 YES
 YES
 NO
Feed shaft separate from leadscrew to
avoid excessive wear on lead screw
 YES
 YES
 NO
Left Hand threading, with the flip of a
lever
 YES
 YES
 NO
2 Year Warranty
 YES
 YES
 NO
Variable Speed, that can be changed
while running to fine tune the speed
 YES
 YES
 NO
Solid Chuck Mount, so no chance of
chuck unscrewing when in reverse
 YES
 YES
 NO
Comparison Chart