Main Specifications:
                                        3280              32120           32160            32200             32240

  • Max. swing over bed                                                                         32”
  • Max. length of workpiece                       80”                120"             160"               200"                240"
  • Max. swing over cross slide                                                           20-1/2”
  • Max. Swing in gap                                                                          39-1/8”    
  • Width of Bed                                                                                  21-3/4”
  • Effective length in gap to spindle                                                      14”
  • Effective length in gap to chuck jaws                                                  9”
  • Spindle bore                                                                            D1-11   /   5-1/8”  
  • Taper of spindle center                                                                   MT 5
  • Spindle speeds                                                                 7.5-1,000 rpm / 18 steps
  • Longitudinal feeds                                                           0.002-0.096 IPR, 64 kinds
  • Cross feeds                                                                      0.001-0.48 IPR, 64 kinds
  • Inch threads                                                                        32-1/16  TPI, 74 kinds
  • Metric threads                                                                      1-256 mm , 58 kinds
  • Module threads                                                                   0.5-128 mm, 58 kinds
  • Diametral pitch threads                                                        32-1/8 DP , 58 kinds
  • Max. travel of top slide                                                                       8”
  • Max. travel of cross slide                                                                19-1/2”
  • Longitudinal Rapid Travel Speed                                                               150" / min.
  • Cross Slide Rapid Travel Speed                                                  75" / min.
  • Diameter of tailstock quill                                                                   5”
  • Max. travel of tailstock quill                                                              9-1/2”        
  • Taper of tailsotck quill center                                                         M.T. # 6        
  • Main motor                                                            20 HP, 220V/440V, 3 phase, prewired 220V
  • Rapid Traverse Motor                                            2 HP, 220V/440V, 3 phase, prewired 220V
  • Coolant pump motor                                            1/8 HP, 220V/440V, 3 phase, prewired 220V
  • Net weight, approx.                       11,300lbs          11,900lbs       12,900lbs      13,500lbs        14,200lbs   
  • Overall dimensions, LxWxH         178x59x76”        212x59x76"    288x59x76"    296x59x76"     337x59x76"
Standard Equipment
  • 15” 3-Jaw Chuck with Top Reversible Jaws
  • 25” 4-Jaw Chuck with Top Reversible Jaws
  • 31-1/2” Face plate
  • 12” Drive Plate
  • 16” Steady Rest with Roller Jaws
  • Follow Rest
  • Removable Gap
  • 4-Way Tool Post
  • Foot Brake
  • Work Light
  • Coolant System
  • Splash Guard  
  • (2) Dead Centers
  • (1) Reducing Sleeve
  • Thread Chasing Dial
  • Tool box and leveling pads
GMC
GML 32" HD Lathes
Machine Features:
  •  Large Spindle Bore 5-1/8”
  •  Heavy Duty Spindle D1-11  
  •  Heavy Duty Guideway Width 21-11/16”
  •  Heavy Duty Main Motor 20 HP
  •  18 Spindle Speeds from 7.5-1,000 rpm
  •  74 Kinds of Inch Threads
  •  47 Kinds of Metric Threads
  •  Threading and Feeding Rate Change Without Changing Gears
  •  Spindle is Balanced, Hardened and Precision Ground
  •  Spindle is Supported at 3-Point by High Precision Bearings   
  •   4-Way Rapid Traverse to Carriage and Cross Slide
  •  All gears and Shafts are Hardened and Precision Ground
  •   Adjustable Hydraulic Clutch for Spindle Turning and Brake
  •  Guideways Induction Hardened and Precision Ground
  •  Automatic Lubrication System in Headstock and Feed Box
  •  One year warranty for parts