| Quality Machine Tools sales@machinetoolonline.com :Email 412-787-2876 :or call for your immediate needs! |
Birmingham
YCL-1340GH
YCL-1440GH
YCL-1440GH
YCL-1340 Main Features:
- 2HP Main Motor, Wired at 220 Single Phase
- Bed is Constructed of HIgh Tensile Strength Cast Iron
- Permanently Filtered Oil Headstock Bath
- 8 Speed Headstock with 70 to 2,000 RPM.
- Speed Changes by Headstock Quick Change Lever Action
- Main Spindle Loaded on High Quality Precision Bearings
- Heavy Duty Stand and Back Splash included Standard
YCL-1440 Main Features:
- 3HP Main Motor
- No Change Gears Required
- 16 Speeds from 45-1,800 RPM
- D1-4 Spindle with 1 1/2" Bore
- 40 Kinds of Inch Threads from 4-112 TPI
- Removable Gap Bed
- Magnetic Controls and Spindle Foot Brake
- T-Slotted Compound
- Main Spindle Hardened and Precision Ground
 |
 |
 |
 |
 |
 |
 |
Main Specifications:
YCL1340GH YCL1440GH
YCL1340GH YCL1440GH
- Swing Over Bed 13" 14"
- Swing Over Cross Slide 8" 9"
- Distance Between Centers 40"
- Swing in Gap 18-3/4" 20"
- Width of Bed 7-7/8" 8-1/8"
- Spindle Nose D1-4
- Spindle Bore 1-3/8" 1/1/2"
- Taper of Spindle MT #5
- Range of Spindle Speeds 8 Speeds, 70-2000 16 Speeds, 45-1800
- Inch Threads 4 - 112 TPI (40 Kinds)
- Metric Threads 0.45 - 7.5 (22 Kinds)
- Longitudinal Feed Range 0.0012" - 0.0294" REV (40 Kinds)
- Cross Feeds Range 0.003" - 0.01" REV (40 kinds)
- Leadscrew Diameter 7/8"
- Cross Slide Travel 6-7/8" 7"
- Compound Slide Travel 3 3/4" 4"
- Center Taper MT#5 MT #3
- Quill Travel / Diameter 4 3/4" / 2-3/4"
- Main Motor 2 HP, Single Phase 3 HP / 1.5 HP, 3 Phase
- Coolant Pump 1/8 HP
- Machine Size (L x W x H) 73-1/4" x 30" x 33" 72"x31"x49"
- Net Weight (lbs) 1,100 lbs 2,000 lbs
YCL-1340 Standard Equipment:
- Motor Pulley
- Back Plate with 3-Jaw Chuck
- Back Plate with 4-Jaw Chuck
- MT #5 Center
- Stand
- Foot Brake
- 4-Way Tool Post
- 3-Jaw Scroll Chuck
- 4-Jaw Independent Chuck
- Complete Electrical Equipment
- Follow Rest
- Steady Rest
- Splash Guard
- 11-3/4" Face Plate
YCL-1440 Standard Equipment:
- Main Motor 3 HP
- 4 - Way Tool Post
- Removable Gap
- Stand
- Splash Guard
- Foot Brake
- Thread Chasing Dial
- Chip Tray
- Center and Reducing Sleeve
- Tool Kit with Tools and Leveling Pads
- Coolant System
- 6" 3 Jaw Chuck
- 8" 4 Jaw Chuck
- 12" Face Plate
- 3-3/4" Steady Rest
- Follow Rest
- Spindle Jog Button Control